c++ - CMake:不支持的 GNU 版本 -- 不支持高于 8 的 gcc 版本-6ren

CMake: Phiên bản GNU không được hỗ trợ -- các phiên bản gcc cao hơn 8 không được hỗ trợ

In lại 作者：行者123 更新时间：2023-12-04 18:26:33

在降级我的 GCC 之前，我想知道是否有办法确定我的机器中的哪些程序/框架或依赖项会中断，以及是否有更好的方法来执行 openpose 安装？ (例如，在 CMake 中更改某些内容)
有没有办法在不改变我的系统 GCC 版本并可能破坏其他东西的情况下解决这个问题？

[10889:10881 0:2009] 09:21:36 Wed Jan 06 [mona@goku:pts/0 +1] ~/research/code/openpose/build
$ make -j`nproc`
[ 12%] Performing configure step for 'openpose_lib'
CMake Warning (dev) at cmake/Misc.cmake:32 (set):
  implicitly converting 'BOOLEAN' to 'STRING' type.
Call Stack (most recent call first):
  CMakeLists.txt:25 (include)
This warning is for project developers. Use -Wno-dev to suppress it.

-- Found gflags (include: /usr/include, library: /usr/lib/x86_64-linux-gnu/libgflags.so)
-- Found glog (include: /usr/include, library: /usr/lib/x86_64-linux-gnu/libglog.so)
-- Found PROTOBUF Compiler: /usr/local/bin/protoc
-- HDF5: Using hdf5 compiler wrapper to determine C configuration
-- HDF5: Using hdf5 compiler wrapper to determine CXX configuration
-- CUDA detected: 10.1
-- Added CUDA NVCC flags for: sm_75
-- Found Atlas: /usr/include/x86_64-linux-gnu  
-- Found Atlas (include: /usr/include/x86_64-linux-gnu library: /usr/lib/x86_64-linux-gnu/libatlas.so lapack: /usr/lib/x86_64-linux-gnu/liblapack.so
-- Python interface is disabled or not all required dependencies found. Building without it...
-- Found Git: /usr/bin/git (found version "2.25.1") 
-- 
-- ******************* Caffe Configuration Summary *******************
-- General:
-- Version : 1.0.0
-- Git : 1.0-149-g1807aada
-- System : Linux
-- C++ compiler : /usr/bin/c++
-- Release CXX flags : -O3 -DNDEBUG -fPIC -Wall -std=c++11 -Wno-sign-compare -Wno-uninitialized
-- Debug CXX flags : -g -fPIC -Wall -std=c++11 -Wno-sign-compare -Wno-uninitialized
-- Build type : Release
-- 
-- BUILD_SHARED_LIBS : ON
-- BUILD_python : OFF
-- BUILD_matlab : OFF
-- BUILD_docs : OFF
-- CPU_ONLY : OFF
-- USE_OPENCV : OFF
-- USE_LEVELDB : OFF
-- USE_LMDB : OFF
-- USE_NCCL : OFF
-- ALLOW_LMDB_NOLOCK : OFF
-- USE_HDF5 : ON
-- 
-- Dependencies:
-- BLAS : Yes (Atlas)
-- Boost : Yes (ver. 1.71)
-- glog : Yes
-- gflags : Yes
-- protobuf : Yes (ver. 3.6.1)
-- CUDA : Yes (ver. 10.1)
-- 
-- NVIDIA CUDA:
-- Target GPU(s) : Auto
-- GPU arch(s) : sm_75
-- cuDNN : Disabled
-- 
-- Install:
-- Install path : /home/mona/research/code/openpose/build/caffe
-- 
-- Configuring done
-- Generating done
CMake Warning:
  Manually-specified variables were not used by the project:

    CUDA_ARCH_BIN


-- Build files have been written to: /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build
[ 25%] Performing build step for 'openpose_lib'
[ 1%] Running C++/Python protocol buffer compiler on /home/mona/research/code/openpose/3rdparty/caffe/src/caffe/proto/caffe.proto
Scanning dependencies of target caffeproto
[ 1%] Building CXX object src/caffe/CMakeFiles/caffeproto.dir/__/__/include/caffe/proto/caffe.pb.cc.o
[ 1%] Linking CXX static library ../../lib/libcaffeproto.a
[ 1%] Built target caffeproto
[ 4%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/util/cuda_compile_1_generated_math_functions.cu.o
[ 4%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_bnll_layer.cu.o
[ 4%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_accuracy_layer.cu.o
[ 4%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_batch_reindex_layer.cu.o
[ 4%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_batch_norm_layer.cu.o
[ 4%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_bias_layer.cu.o
[ 4%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_base_data_layer.cu.o
[ 4%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_concat_layer.cu.o
[ 5%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_clip_layer.cu.o
[ 6%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_absval_layer.cu.o
[ 6%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_conv_layer.cu.o
[ 6%] Building NVCC (Device) object src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_contrastive_loss_layer.cu.o
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /usr/include/cuda_runtime.h:83,
                 from :
/usr/include/crt/host_config.h:138:2: error: #error -- unsupported GNU version! gcc versions later than 8 are not supported!
  138 | #error -- unsupported GNU version! gcc versions later than 8 are not supported!
      | ^~~~~
In file included from /home/mona/research/code/openpose/3rdparty/caffe/src/caffe/util/math_functions.cu:1:
/usr/include/math_functions.h:54:2: warning: #warning "math_functions.h is an internal header file and must not be used directly. This file will be removed in a future CUDA release. Please use cuda_runtime_api.h or cuda_runtime.h instead." [-Wcpp]
   54 | #warning "math_functions.h is an internal header file and must not be used directly. This file will be removed in a future CUDA release. Please use cuda_runtime_api.h or cuda_runtime.h instead."
      | ^~~~~~~
CMake Error at cuda_compile_1_generated_clip_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_clip_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:114: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_clip_layer.cu.o] Error 1
make[5]: *** Waiting for unfinished jobs....
CMake Error at cuda_compile_1_generated_absval_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_absval_layer.cu.o


CMake Error at cuda_compile_1_generated_concat_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_concat_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:65: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_absval_layer.cu.o] Error 1
make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:121: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_concat_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_batch_reindex_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_batch_reindex_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:93: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_batch_reindex_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_bias_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_bias_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:100: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_bias_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_batch_norm_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_batch_norm_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:86: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_batch_norm_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_contrastive_loss_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_contrastive_loss_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:128: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_contrastive_loss_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_conv_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_conv_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:135: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_conv_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_accuracy_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_accuracy_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:72: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_accuracy_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_base_data_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_base_data_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:79: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_base_data_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_bnll_layer.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/layers/./cuda_compile_1_generated_bnll_layer.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:107: src/caffe/CMakeFiles/cuda_compile_1.dir/layers/cuda_compile_1_generated_bnll_layer.cu.o] Error 1
CMake Error at cuda_compile_1_generated_math_functions.cu.o.Release.cmake:220 (message):
  Error generating
  /home/mona/research/code/openpose/build/caffe/src/openpose_lib-build/src/caffe/CMakeFiles/cuda_compile_1.dir/util/./cuda_compile_1_generated_math_functions.cu.o


make[5]: *** [src/caffe/CMakeFiles/caffe.dir/build.make:499: src/caffe/CMakeFiles/cuda_compile_1.dir/util/cuda_compile_1_generated_math_functions.cu.o] Error 1
make[4]: *** [CMakeFiles/Makefile2:371: src/caffe/CMakeFiles/caffe.dir/all] Error 2
make[3]: *** [Makefile:130: all] Error 2
make[2]: *** [CMakeFiles/openpose_lib.dir/build.make:112: caffe/src/openpose_lib-stamp/openpose_lib-build] Error 2
make[1]: *** [CMakeFiles/Makefile2:76: CMakeFiles/openpose_lib.dir/all] Error 2
make: *** [Makefile:84: all] Error 2
21834/31772MB(openpose) 
[10889:10881 0:2010] 09:21:55 Wed Jan 06 [mona@goku:pts/0 +1] ~/research/code/openpose/build
$

我有:

$ gcc --version
gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

我在 Ubuntu 20.04 上遵循此处的编译说明:
https://github.com/CMU-Perceptual-Computing-Lab/openpose/blob/master/doc/installation/README.md#prerequisites

1 Câu trả lời

通过将 GCC 从 9.3.0 降级到 7 来解决:

$ sudo apt remove gcc
$ sudo apt-get install gcc-7 g++-7 -y
$ sudo ln -s /usr/bin/gcc-7 /usr/bin/gcc
$ sudo ln -s /usr/bin/g++-7 /usr/bin/g++
$ sudo ln -s /usr/bin/gcc-7 /usr/bin/cc
$ sudo ln -s /usr/bin/g++-7 /usr/bin/c++
$ gcc --version
gcc (Ubuntu 7.5.0-6ubuntu2) 7.5.0
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

关于c++ - CMake:不支持的 GNU 版本 -- 不支持高于 8 的 gcc 版本，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/65605972/

Bài viết được đề xuất: c# - .NET Core - HTTPClient - Ubuntu 20.04 上的 dh key 太小

Bài viết được đề xuất: python - 在 ubuntu 服务器上安装 mariadb 时出错

Bài viết được đề xuất: ubuntu - 在 ubuntu 桌面 22.04 上安装 pgadmin4-web

Bài viết được đề xuất: ubuntu - VirtualGL 和 TurboVNC : extension "GLX" missing on display ":0.0"

c - 高于 32767 的短整型值
当试图在 C 中存储大于 32,767 的短整数值时，只是为了看看会发生什么，我注意到打印到屏幕上的结果是我试图存储的数字 - 65,536。例如。如果我尝试将 65,536 存储在一个短变量中，则打
Locust 95% 高于 max
有时，当我在某些情况下运行 locust 时，95% 的值大于最大值。据我了解，95% 意味着 95% 的请求花费的时间比这短。那么 Max 值怎么会小于 95%？我在这里做错了什么。我还发现只有在
macos - NSAlert 高于 NSPopover
我有一个从 NSStatusItem 显示的 NSPopover。这个 Popover 会时不时地显示 NSAlerts。问题是这些警报总是出现在弹出窗口下方，即使它们成为关键窗口。即使我拖动它，它仍
Gnuplot:具有交替偏移的数据点标签(高于/低于数据点)
我正在某个数据集中绘制几条线。几个数据点(下例中的第 13 列)是特殊的，我希望它们用圆圈标记并标记(标签在第 12 列中)。 plot "data.csv" using 0:13 with circ
android - 高于 2dp 的高度会导致按钮消失
在我下面的代码中，我有一个高度为 8dp 的白色 View 。蓝色按钮的高度为 10dp，因此理论上它应该显示。然而，事实并非如此。它只显示不在白色 View 正上方的部分。我知道这与海拔有关，但我不
iphone - MapView 高于 iOS 应用程序中的所有对象
我在 nib 文件的 View 中有一个 mapView，委托(delegate)设置为文件的所有者，导出设置为 IBOutlet MKMapView* mapView; 我遇到的问题是 map 高于
javascript 表示 4 高于 16
function getNum() { num = $('.slicesinput').val(); num2 = $('.numinput').val(); if (num
android - 高于 maxVelocity 将方向更改为对角线，解决方法
Android 的 VelocityTracker 类中的缺陷是，如果 X 方向的速度超过 maxVelocity，它会更改为等于 maxVelocity，Y 方向也相同。但是，这意味着如果我们要20
html - 响应表，试图让标题*高于*列
我们有如下表格。我正在尝试使用发现的一些技巧使其响应 here . 现在的结果是我在 iPhone 上看到了以下内容: header1 header2 etc col1 col2 etc 当我希望 h
android - 让 admob 高于 actionbarsherlock
我想在同一个 Android 应用程序中使用 AdMob 和 ActionBarSherlock，但我无法将 AdMob 放在屏幕顶部(Sherlock ActionBar 上方)。有人遇到过类似的
高于 U+FFFF 的字符的 Javascript 文字
我的 javasacript 源代码是严格的 ascii，我想表示 anger symbol在字符串文字中。这在 javascript 中可能吗？最佳答案 JavaScript 字符串实际上是 UT
javascript - 高于 VMR9 时 HTML 闪烁
我正在开发一个带有 ActiveX 的网络应用程序，该应用程序使用 FFMPEG 解码视频并使用 VMR9 呈现视频。出于某种原因，每次我尝试放置一些 HTML(即使使用 IFrame)都会导致面板闪
html - 如果 div 高于 body，则防止页面滚动
我有一个可以高于页面主体的元素“div”。我希望页面不会向下滚动。我需要一个 CSS 技巧，我不能使用 JS 来获取屏幕高度。有什么想法吗？ http://jsfiddle.net/L83aLbk4/
php - 结帐字段 - 使 billing_address_2 高于 billing_address_1
在 WooCommerce 结帐字段中，我试图在结帐表单上将 billing_address_2 设置在 billing_address_1 之上。所以不是: Street Address Apar
ios - AudioKit - 获取特定频率(高于 20kHz)的问题
我在使用 AudioKit 时遇到了一个小问题框架: ----> 我无法让 AudioKit 框架拾取高于和低于特定数量的特殊频率。 (频率低于 100Hz 和高于 20kHz) 编辑:我已经在我的
java - 发出声音的权限 - android studio api 高于 21
我正在尝试激活我的手机中的应用程序但我需要代码许可我尝试了所有这些来发出声音 android.permission.RECORD_AUDIO android.permission.CAPTURE_AU
jquery - 低于 0 时禁用按钮，高于 0 时启用
我有一个 div，其中的值是 0 标准。我有两个按钮，+ 和 - 当值为 0 时，我希望禁用我的 - 按钮，并且从它被禁用的那一刻起高于 0 我希望启用它。 if (number == 0) {
machine-learning - Keras:为什么 'accuracy' 高于 'val_acc' ？
我使用 metrics=['accuracy'] 编译了一个模型，并且我获得的值始终高于验证准确度 val_acc。例如: Epoch 19/20 53/53 [===================
html - 箭头略低于 div 边界(高于 1 px)
我这里有一个导航栏代码。当我将鼠标悬停在链接上时，一个 png 图像的小箭头应该显示在它下方的中央。下面的代码在 Firefox 和 Chrome 中运行良好，但在 IE 中，箭头稍微低于 div，因
html - 当我将智能手机翻转到横向时，响应 div 高于 100%。如何解决？
这是我的 div(父/子)HTML 代码: Arvan Tourism Explore our wonderful Albania.

行者123

Hồ sơ cá nhân

Tôi là một lập trình viên xuất sắc, rất giỏi!

Bài viết phổ biến của tác giả

Nhận phiếu giảm giá Didi Taxi miễn phí

Các bài viết nóng hổi trên toàn bộ trang web

trang đầu

đã học

Trí tuệ nhân tạo 6Ren

Trung tâm mua sắm

CMake: Phiên bản GNU không được hỗ trợ -- các phiên bản gcc cao hơn 8 không được hỗ trợ